As soon as you finish the interior of the package move out the sander and the jig found and cut off all the excess junk about your fiberglass box. We are going to use rug on our package, therefore we don’t have to mud the actually fiberglass mold. As an alternative we just mud all of the sides and ends so that it suits warm in to the trunk of the Honda Prelude.
I’ve observed many فایبرگلاس در خودرو sub instructions that report how to make a custom fiberglass sub box. Nothing of these instructions have really discussed how just to complete it. Both they don’t have enough images or don’t explain it correctly. In this manual I’m likely to provide you with the In’s and Out’s of Making a custom fiberglass sub box. I have decided to produce a sub package for my Honda Prelude. I’m likely to be installing a JL Sound W3V3 with a 500 w Alpine Amplifier.
Okay, time and energy to start building a fiberglass sub package! The first step to creating the package is drawing out some ideas on what you want and how to you want to do it. When fiberglassing, you can’t really resolve your problems because when fiberglass resin is dry, its DRY.
We wanted to produce a easy package that could save yourself room, and look oem to the prelude. We started by putting masking tape down therefore no fiberglass resin gets on the rug, because if it does, its ruined. Also, ensure that you tape extra room your actually planning to use simply to be safe.
We did about 2-3 layers of tape and then also included some aluminum foil as a layer, as never to get any glass on the carpet. Once you genuinely believe that you’ve enough tape and there’s no possible way that anymore fiberglass could get to the rug; do another layer.
The next phase after you have utilized everything is to begin fiberglassing. Before you combine your fiberglass with your hardener, you need to reduce pieces from the fiberglass mat. I often produce pieces about 7-9 inches wide. When you’re prepared, the thing you need to complete is combine your fiberglass with your hardener in the mixing cup.
The hardener can have just how much fiberglass resin to hardener combine to make. Make sure you make before you start fiberglassing as it dries fairly quick. Color a layer of fiberglass resin onto the tape without any mat. Following you’ve colored a layer set fiberglass cushion down and color another layer around fiberglass following that. Delay about 10 minutes and then do another layer before it dries completely.
Today, wait at the least one hour and let the fiberglass resin absolutely dry. When its dry, you can take the shape out and split off all of the tape and aluminum foil. Put it back your trunk and acquire wherever you want to reduce off. Make sure you get gradually and don’t take the whole thing off at once.
So you have to cut right out a MDF ring for your sub to screw into. Some prefer to produce a flush ring with a hub but I prefer the main one ring way better. I’m employing a 10 inch jl audio w3 therefore I cut right out a 10 inch ring and applied the requirements from the package to produce a ring the proper size.
Then we taken out our newly cut fiberglass package and set another layer of fiberglass cushion on it. Generally you want to do about 5-6 layers of fiberglass. Some claim you should be in a position to stay on your own package without it breaking. Yet another excellent fiberglassing idea is to get rid of as numerous air bubbles as possible. This may produce the shape a whole lot tougher because there’s no air pockets. You do this by poking the fiberglass rather than actually attempting to color it.
Okay, enough playing around; back again to fiberglassing! Next we put on a last layer of fiberglass cushion and resin. Following this has absolutely dried (about 3 hours) we started sanding and cutting to obtain the design we wanted with our custom fiberglass sub box.
Once your right back shape looks excellent to you its time and energy to collection your MDF ring up how to want your sub to be. Hold your ring up wherever you think you’d like it. Reduce some dowel rods to measurement and place your ring how you want it. We applied superglue and epoxy to keep the dowel rods and the MDF ring in place. Its important your ring is quite strong and strong because we are going to stretch fleece around it.
Be sure that as soon as your ring is set up every viewpoint looks excellent and to even you. Once you stretch the fiberglass and start painting resin about it, there’s no turning back.
Now’s the fun part. That is wherever your fiberglass sub package begins ahead together. Grab your fleece and stretch it around your shape you’ve made. Make sure you stretch it as tight as you possibly can so are there no creases or free parts. The fleece should really be touching every side of the trunk of the fiberglass mold.
Make use of a preference gun to secure the fleece to the sub fiberglass mold. Preference the basics in the medial side of the fiberglass package which means you don’t fiberglass around them and keep these things be stuck forever. Once you think its done look it over again from all side and make sure it seems how you want it to look because after the fiberglass resin is on, its that shape forever.